COSTS & SAVINGS

Dual Heat Pump System

AWARD WINNING
FASTEST PAYBACK

Adlår’s Dual Heat Pump system delivers superior efficiency by understanding the thermodynamic principles of heat pumps. 

With our own install team and an optimised installation process Adlår can install better equipment at lower cost, giving you the most value for money.

FAQ's

The current government funding only has funding to cover 90,000 homes. Make sure you take advantage of the £7,500 BUS Scheme now. £7,500 represents roughly 90~80% of the cost of your install. 

Apply for the Boiler Upgrade Scheme: Check if you’re eligible – GOV.UK (www.gov.uk)

You’re eligible for a grant if all the following are true. You must:

  • own the property you’re applying for (including if it’s a business, a second home, or a property you rent out to tenants)
  • have installed (or plan to install) your new heating system on or after 1 April 2022
  • be replacing fossil fuel heating systems (such as oil, gas or electric)

You’re still eligible if you’ve already had funding to make your property more energy efficient, for example by insulating it.

 

You must have an up-to-date EPC Certificate in order to get the grant. 

You must have property rights to outdoor space at your property either on the:

  • Ground floor (1m away from the property boundary);
  • Wall space (on the ground floor if it will face a public highway, or any suitable wall facing away from a public highway);
  • Flat roof (with 1m space to the edge of the roof) to place the pump?

    *Dimensions required: 1,100 * 445 * 850 (L*D*H)

If your house is within a Conservation Area or World Heritage Site we cannot install the pump on a wall or roof facing a public highway. You must therefore have space not facing a highway.
 
Permitted development does not apply for Listed Buildings or within a site designated as a Scheduled Monument.
 

We recommend you check with the following parties before installing your ASHP

  • The property owner
  • Your mortgage provider
    •  Your mortgage provider may subsidise the cost of installation for you. 
  • Insurance provider
  • Local planning authorities if your property falls under either of these categories:
    • Listed building
    • Conservation area

Pricing for smaller properties starts below £1,000 making Adlår one, if not the most, competitive companies in the market.

We achieve this through our direct from the installer model and through an optimised installation process.

Our standard installation package has a few assumptions. Additional works are quoted during your site survey. The assumptions are as follows:

  • Ground mounted
  • Cylinder in location with hot and cold feeds and easy fixing of pressure release pipework
  • No radiator or emitter upgrades
  • >5m of pipework from heat pump to flow and return

CUSTOMER REVIEW:

61% consumption reduction

1.68kWh Peak with AURORA II from 4.29kWh peak with competing brand in a single heat pump system setup.

“Considering the large temperature differences between the test dates the reduction in consumption could likely be up to 100%. Making a huge difference to their energy costs throughout the year. To compare with a gas boiler. The average per unit of gas price is 6.89p per kWh. A 24kW boiler for an average house of this size with 10 radiators you would expect to pay ~£1.65 an hour. Like for like, 24 hour gas heating therefore would have cost £39.60, using these assumptions. In reality, a gas boiler would turn OFF and ON, so this is a high assumption. If the gas boiler was only ON 6 hours a day the charge would have been £9.90, a £4.22 saving per day.”

ADLÅR COSTS:

  • Site Survey & Heat Loss Report
  • Supply and Installation
  • Boiler Removal and Recycle
  • Grant Application £7,500

Our standard installation package has a few assumptions. Additional works are quoted during your site survey. The assumptions are as follows:

  • Ground mounted
  • Cylinder in location with hot and cold feeds and easy fixing of pressure release pipework
  • No radiator or emitter upgrades
  • >5m of pipework from heat pump to flow and return
Adlår Castra | Pricing | Fastest Payback Heat Pump System | Adlår Castra warmtepomp
EFFICIENCY GAINS:

There are some big thermodynamic advantages to a dual heat pump system which maximise the characteristics of heat pumps. The results are much lower energy consumption and costs. To deep dive into the technical aspects click on the link button below.

  1. Two Temperatures Heated Separately
  2. Hot water from indoor air inlet
  3. Reduce need for maximum power
  4. No low-loss header losses
  5. No losses in pipework
  6. Direct to your emitters
  7. Less moving parts

 

Adlår Castra | Pricing | Fastest Payback Heat Pump System | Adlår Castra warmtepomp

Your Journey:

1

Adlår Castra | Pricing | Fastest Payback Heat Pump System | Adlår Castra warmtepomp

Free Consultation

Get free advice and a consultation with our team.

2

Adlår Castra | Pricing | Fastest Payback Heat Pump System | Adlår Castra warmtepomp

Free Survey

Get one of our experts to visit your home and give you a fixed price offer and a heat loss survey.

3

Adlår Castra | Pricing | Fastest Payback Heat Pump System | Adlår Castra warmtepomp

Confirmation

With a £99.00 refundable deposit we fix you an installation date and process your £7,500 BUS Grant Application.

4

Adlår Castra | Pricing | Fastest Payback Heat Pump System | Adlår Castra warmtepomp

Delivery

Your heat pumps are delivered either on the day or a couple of days before your install. 

5

Adlår Castra | Pricing | Fastest Payback Heat Pump System | Adlår Castra warmtepomp

Install

Our optimised 1~2 day install and commissioning. 

6

Adlår Castra | Pricing | Fastest Payback Heat Pump System | Adlår Castra warmtepomp

Follow up

Our support team follow up with your install and answer any questions, if any, in regards to your new heating system.

Adlår Castra | Pricing | Fastest Payback Heat Pump System | Adlår Castra warmtepomp

GET AN ESTIMATE:

Free CONSULTATION:

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

PRE-SURVEY CHECKS

The heat pump fan needs to be situated at least 1m from your property boundary.

Other specific siting requirements exist for conservation areas and wall/roof mounting, but this is the main criteria.

You need space for our hot water cylinder and 2x 18L expansion vessels inside your property.

The only limiting factor of our system is the ventilation of our cylinder. We need to vent the cylinder externally or into a ‘dead’ space, like a loft.

Cylinders can be placed in any location throughout your home, but if the hot and cold feeds, and pressure release pipework isn’t in place this will need to be done before the install.

Unique ADLÅR FEATURES

Our ASHP cylinders produce cold air as a by product. In the winter we remove the waste air externally or into a dead space above insulation, but in the summer we can redistribute this cold air into your rooms.

If you have existing solar, these can be smartly connected to our heat pumps. This turns your cylinder into a thermal battery, working 3.8x more efficiently than a Solar iBooster.

When you only need hot water, and not heating, your outdoor unit can be turned off, just at the time you are actually likely to be in your garden.

Our cylinders can be equipped with an electric anode, which balances the mineral content of your water by filtering out calcium, extraneous particles, chlorine and heavy metals. The result is an almost neutral pH.

Unlike most heat pump systems, and heating systems in general, you either have hot water or heating. With Adlår’s dual heat pump system you always have both.